Rough Clean vs Final Clean vs Touch-Up: Post-Construction Cleaning Stages and Costs in Florida

Post-construction cleaning happens in three stages: a rough clean after the heavy work, a final clean after finish work, and a touch-up clean after the punch list. In Florida, a full post-construction clean of a home runs about $300–$500 under 1,500 sq ft, $400–$800 for 1,500–3,000 sq ft and $600–$1,500 or more for larger homes in 2026 (estimates). Commercial buildouts run about $0.10–$0.30 per square foot. For vetted crews, see our Florida post-construction cleaning page.
The three stages of post-construction cleaning
| Stage | When it happens | What gets done | Share of full price |
|---|---|---|---|
| Rough clean | After framing, drywall and major trades, before finish work | Debris, sawdust, scrap and bulk dust removed; floors swept; trash hauled to the dumpster | 40 – 60% |
| Final clean | After paint, trim, cabinets, fixtures and flooring | HEPA vacuuming of fine dust, glass and window tracks, sticker and adhesive removal, inside cabinets and appliances | Largest share |
| Touch-up clean | After the punch list, right before handover or move-in | Fingerprints, smudges and dust left by the last trades; final walk-through | 20 – 40% |
New construction usually pays for all three stages. A kitchen or bathroom remodel usually needs only one final clean of the work area plus the rooms where dust traveled. When you compare quotes, check which stages each company included, because a low price for a single final clean is not comparable to a three-stage quote.
What a rough clean includes
- Remove wood scraps, drywall pieces, packaging and other construction debris
- Sweep and vacuum subfloors so finish trades start on a clean surface
- Wipe dust off window frames, outlets and framing where finish work will go
- Clear tubs, showers and sinks of debris before fixtures are set
What a final clean includes
- HEPA vacuum every surface, including vents, light fixtures and the tops of door frames
- Clean windows, glass and sliding-door tracks, removing paint specks and stickers
- Remove adhesive, caulk and grout haze from tile, counters and fixtures
- Clean inside cabinets, drawers and appliances
- Wipe baseboards, doors, trim and switch plates
- Clean and polish floors according to the flooring manufacturer's instructions
What a touch-up clean includes
The touch-up clean happens after the last trade leaves. Crews remove fingerprints from walls and cabinets, dust that settled after the final clean, and any marks left by punch-list repairs. In many Florida projects it is the clean the homeowner sees at the walk-through, so it matters more than its size suggests.
Construction dust and safety rules to know
Dust from cutting concrete, stone, brick and tile can contain respirable crystalline silica, which OSHA regulates on construction sites. That is one reason professional crews use HEPA vacuums instead of dry sweeping. If the home was built before 1978 and the renovation disturbed painted surfaces, the contractor must follow the EPA lead renovation rules, including specific cleanup steps, before anyone else cleans the area.
What changes the cost of post-construction cleaning
- Square footage and stages: the biggest factors in every quote.
- Amount of glass: windows, sliding doors and shower enclosures take time to scrape and polish.
- Fine-dust level: drywall sanding and tile cutting leave dust in every surface.
- Debris left behind: confirm whether the contractor or the cleaning crew hauls it away.
- Deadline: a same-week handover or a closing date can add a rush charge.
After the handover
Once the space is livable, a regular cleaning schedule takes over. Homeowners often book a one-time deep clean a few weeks after move-in, when the last construction dust has settled, and offices add day porter service once they open.
Related reading
Ready to get matched with vetted Florida cleaners?
Three free quotes from licensed, insured, background-checked companies — in 60 seconds.


